• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be altered up to 20 times. This will then allow your vehicle to start.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are seeking to improve their security. There are many types of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However, not all of these are equally efficient in protecting your vehicle. A tracking system may help you locate your car if it is stolen however, it won't prevent the crime. Immobilisers, in contrast, do exactly what they state on the tin - they shut off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to create an unique sequence that needs to be entered to allow the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. In addition, there is also an app on mobile that can function as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great solution if you want to give your car to valet parking or maintenance. The immobiliser will stay in operation.

The ghost immobiliser problems is a unique and innovative device that works in conjunction with the buttons on your vehicle instead of being a separate unit. It's not just an effective deterrent to theft of your vehicle however, it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch ghost car immobiliser immobiliser is a high-tech security system that protects your pride and joy against key cloning, hacking & ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be plugged into the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices which are a typical technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates silently in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons on your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can create a sequence that is up to 20 presses long to increase security. The iPhone app only allows one connection, using a unique pairing code for ghost immobiliser Problems the Ghost. All communication between the two devices is secured.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only run if a valid PIN code has been entered. It can be temporarily operated in valet or service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can give your car to a valet or service without needing to enter a code.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to stop your car from operating normally until you enter a customized code. The system can be turned on and off using your own smartphone app without the need for additional wires.

The standard factory immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. The car will begin to start if the correct code is sent. However, if a transponder from a different vehicle is used instead, the immobiliser won't recognize it. This enables the vehicle to start and be stolen. The Ghost immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning, and even key theft. The only way a thief could steal your car is physically towing it away and even then, they would not be allowed to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to create an unique PIN sequence that can be changed that needs to be entered before you can use your car. This is done without any extra hardware, such as a keyfob. It can take up to 20 presses. It is also undetectable to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves cannot use sophisticated RF scanning or code-grabbing technology to discover that the security system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming with the buttons. This makes it a perfect supplement to a GPS tracker, which can help locate your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look long on social media sites to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It creates an individual pin code push sequence using the buttons you have on the steering wheel, door panel, and the centre console. The unique pin code must be entered in conjunction with your original key fob in order to prevent the vehicle from beginning. The unique override pin can be found on a black card which you will receive following the installation. It is easy to remember because there are no LED indicators.

The device is hidden within the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to the tracker.

Contrary to other security systems that rely on a relay located in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with the use of a digital block of commands for both the ECU and the engine.

They can also be linked to a separate alarm immobiliser or tracker. This should be specified prior to the installation. They are also fully service/valet mode compatible and a great alternative to a tracker if you are you are taking your car in for an electrical fault at the dealer.

Service/Valet Mode

In recent years, there has been a increase in the number of vehicles that are stolen without owners' keys. It's now easier than ever before to steal your pride & joy due to the availability of key cloning tools & door lock picks. To prevent this from happening, we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle was stolen.

It connects directly to your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely silent because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car and can be reached via the buttons on your steering wheel, the centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits has to be entered before you can start your car.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car from being driven away or started if a PIN code isn't entered first. If you're driving away with the device arming it will display an indicator on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN at this time, the indicator will continue to flash and require a new PIN each time you attempt to start your car.